11kw Home Charger Single Phase Adapter
Mode 1 is plugged into a domestic AC outlet, but it is usually not allowed in most areas, because mode 1 has no special safety electronic equipment. Mode 2 also plugs into a standard household AC outlet and includes these safety features in its ICCB. Mode 3 plug in wall box or charging station for AC charging. It does not include an ICCB. In Europe, consumers often need to bring their own type 3 cable to use their own public AC charging station. Mode 4 is reserved for high-speed DC charging in the charging station
In 2006, China issued the general requirements for plugs, sockets, vehicle couplers and vehicle inlets for conductive charging of electric vehicles (gb/t20234-2006). This national standard specifies in detail the connection classification of charging currents of 16a, 32a, 250A AC and 400A DC. It mainly draws on the standards proposed by the International Electrotechnical Commission (IEC) in 2003, but this standard does not specify the number of connection pins of the charging interface Physical dimensions and interface definitions. In 2011, China introduced the recommended standard gb/t20234-2011, which replaced some contents in gb/t20234-2006. It stipulated that the AC rated voltage should not exceed 690V, the frequency should be 50Hz, and the rated current should not exceed 250A; The DC rated voltage shall not exceed 1000V and the rated current shall not exceed 400A.
Basic Info
Model NO.:HSCDZ-03
Trademark：OLINK
Production Capacity：1000/Year
Q: Is the charging gun always charged?
When the charging pile gun head is not started, the gun head is not charged. Only the gun head is completely consistent with the vehicle body port, and will be powered on after passing the pile and gun identity authentication.
Q: What if the charging point fails?
The charging point has a series of protection functions as follows
1 . Charging pile signal guidance function: the charging pile is connected with the vehicle to complete the charging guidance signal. The charging can be started only when the connection is normal. During the charging process, the signal changes, and the output switch is cut off within 80 milliseconds to stop charging.
2 . Function of two-way switch
The output circuit of the charging pile adopts a two-way switch. When the charging is stopped, the two-way switch is disconnected, which can realize the complete physical isolation between the charging and the input.
Q: Fail to charge when charging starts?
Generally, the failure to charge may be caused by improper operation of a certain step. When preparing to charge, the vehicle needs to be in a flameout state. When inserting the gun, the charging gun and the vehicle need to be well connected and the sound of gun snap can be heard.
Q: Different vehicle charging current?
The output voltage and current of the charging pile is based on the feedback of the vehicle BMS battery management system. The charging pile itself cannot output voltage and current to the vehicle at will. For example, the DC charging pile has 120kw dual guns, and two cars are charged at the same time. The maximum output current of the charging pile is 150A, the maximum output of single gun a is 220a, and the maximum output of single gun B is 150A.
About us
IATF 16949 certifiedprofessional manufacturer on Tesla adapter, CCS combo 1 adapter, CCS combo 2 adapter,type2 adapter and others adapters.
Hot Tags: 11kw home charger single phase adapter, suppliers, manufacturers, factory, customized, wholesale, buy, price, for sale
